 |
Competent and reliable since 1953 |
|
 |
 |
 |
||
|
 |
||||||
|
 |
|
Competent and reliable since 1953 |
|
|
|
|
||
|
|
||||||
|
|
 |
|
| Home | |
| Zinc | |
| Lead | |
| Tin | |
| Lead-free solder | |
| Standards | |
| DIN EN ISO | |
| Electroplating anodes | |
| Corrosion prevention | |
| Radiation prevention | |
| About ourselves | |
| Sitemap
|
Westfalenzinn Zinnhüttenbetrieb J. Jost KG Hüttebrüchen 1 D-59846 Sundern Phone no.:
|
Standards |
|||||
Standards |
|||||
| Below please find our current
DIN and DIN EN standards. These are basic for our production. We keep
far below the maximum amount of impurities allowed in these standards. On request, we can produce according to your works standards. | |||||
DIN 1704 |
For all pure tin products, Sn min. 99.9%. | ||||
DIN 1719 |
For all pure lead products ,Pb
min. 99.97% , as e.g. lead anodes or as a basic for rolled lead. |
||||
DIN EN 1179 |
The purity of our fine zinc wire
and our fine zinc truffles, Zn min. 99.995% is according to this DIN
standards. |
||||
DIN EN 29453 |
Possible impurities in our soft solder and our tin solder are tested to this standard. | ||||
DIN 1707 |
DIN 1707 is for all alloys which are not mentioned in DIN EN 29453. | ||||
DIN 17640 |
This standard is the basic for
the manufacturing of our products for radiation shielding and sound-proofing. |
||||
DIN EN ISO 14919 |
This DIN covers the additives
used for thermic spraying, including permitted tolerances which apply
to the wire dimensions of our fine zinc wire and fine tin wire. |
||||
DIN 59610 |
This DIN states the permitted tolerances for lead sheet. | ||||
| back | |||||